Low Noise Zigzag Spring Machine Diameter 1.5 mm to 5.0 mm Max Outer Diameter 80 mm
Modle | JD-550 Zigzag Spring Machine |
Wire Diameter | 1.2mm-4.0mm |
MAX Outer Diameter | 80mm |
Max. Production Speed | 120pcs/min |
Max Wire Feed Length | Unlimited |
Power Consumption | 22KW |
Monitor Display | Color/Chinese/English |
The Machine Size | ? |
Machine Weights | 3000kg |
Power | 220V 3P 50/60Hz |
Packing | Wooden Case |
Description
Zigzag Spring Machine
Diameter of the steel wire:1.4 mm to 4.0 mm
Max spring outside diameter:80mm
Feeding length:unlimited
Feeding way:adopt overrunning coupler to feeding material
Weight:3000kg
Power:22kw
Dimension:1000*800*1700mm
Feature
To maintain the cleanliness of feeding servo motor to prevent oil and gas, and dust fall into the servo motor
or encoder, resulting in mechanical damage.
At least every six months for maintenance or in accordance with the number of machine production, and
replace the line feed operation at the same time.
Implementation of machine maintenance jobs, follow these steps:
Make sure the power is turned off.
Wipe the parts with cotton cloth, wire feed wheel, sending Line Block, delivers the spindle and other metal
surfaces, removal of the mechanical surface debris, oil, grease, dust, and coated with a of antirust thin oil to prevent mechanical corrosion.
With the cotton swab to remove the old grease and oil stains on the wire feed drive gear.
The transmission tooth gear train gear contact face spreads the gear special-purpose oil lubrication.(Uses
OMEGA73 or same level lubricating oil).
Attention: Please do not use the air spray gun to be clean, in order to avoid the detritus, the dust fall the slide rails sliding way or in the rotation structure gap.
Technical Support
Using Zigzag Spring Machine produce out good springs need rich-experience and skilled workers, however most of the users are lack of skilled workers, they can not produce springs nice and fast.
Many factories do not provide after-sal
Low Noise Zig Zag Spring Machine , Wire Forming Equipment For Compression Springs